Icom IC-R5 Instruction Manual page 45

D D VFO scan watch
q Select memory mode.
• Select a memory bank, if desired.
wPush [MODE•SCAN] for 1 sec. to start memory/bank scan,
if desired.
When scanning memory/bank channels:
Starts memory/bank scan first. Memory/bank scan can-
not be started after VFO scan is started.
e Push [TS•SET] for 1 sec. to enter set mode.
r Rotate [DIAL] to select "PRIO" item.
t While pushing [FUNC], rotate to turn the priority watch ON.
• Select "BELL" if the priority beep function is necessary.
y Push [TS•SET] to exit set mode and start the watch.
• "PRIO" indicator appears.
uPush [MODE•SCAN] for 1 sec. to enter scan type selection
condition.
iRotate [DIAL] to select the desired scan type from "ALL,"
"BAND" and "PROGxx
(xx= 0–24)
o Push [MODE•SCAN] to start the VFO scan watch.
• The receiver checks the memory channel(s) every 5 sec.
• The watch resumes according to the selected scan resume con-
dition. (p. 31)
!0 Push [TS•SET] to cancel the watch and scan.
."
PRIORITY WATCH
• During VFO scan watch
FM P SKIP
PRIO
Searches VFO frequen-
cies for 5 sec.
• During VFO scan watch with priority beep
FM P SKIP
PRIO
Emits beep and blinks "S" indicator when a signal is
received on a memory (bank) channel.
7
FM
PRIO
Pauses on a memory
(bank) channel when a
signal is received.
FM
PRIO
7
34