Set Mode; I General - Icom IC-R5 Instruction Manual

9

SET MODE

I General

Set mode is used for programming infrequently changed val-
ues or conditions of functions.
In addition, the IC-R5 has an expanded set mode which is
used for programming even more infrequently changed val-
ues or conditions of functions. When turning the expanded
set mode OFF, only half of the set mode items are displayed
for simple operation.
D D Set mode entering and operation
q Push [TS•SET] for 1 sec. to enter set mode.
w Rotate [DIAL] to select the desired item.
eWhile pushing [FUNC], rotate [DIAL] to select the desired
value or condition.
rPush [TS•SET] to exit set mode, or rotate [DIAL] to select
another set mode item.
39
[DIAL]
[FUNC]
[TS•SET]
D D Expanded set mode ON/OFF
q Push [TS•SET] for 1 sec. to enter set mode.
w Rotate [DIAL] to select "EXPAND" item.
eWhile pushing [FUNC], rotate [DIAL] to turn the expanded
set mode ON and OFF.
Expanded set mode OFF
r Rotate [DIAL] to select the desired item.
tWhile pushing [FUNC], rotate [DIAL] to select the desired
value or condition.
yPush [TS•SET] to exit set mode, or rotate [DIAL] to select
another item.
Expanded set mode ON