Icom IC-R5 Instruction Manual page 13

u CONTROL DIAL [DIAL]
➥ Rotate to select the operating frequency.* (p. 9)
➥ While scanning, changes the scanning direction.*
(p. 26)
➥ While pushing [SQL], sets the squelch level.* (p. 12)
➥ While pushing [FUNC], sets the operating frequency in
100 kHz, 1 MHz or 10 MHz in VFO mode.* (p. 9)
➥ While pushing [FUNC], selects the memory channel in
10 channels steps in memory mode.* (p. 10)
➥ While pushing [BAND•
in VFO mode.* (p. 7)
i EXTERNAL DC-IN CONNECTOR [DC 6V] (p. 6)
Connects an AC adapter or an optional cigarette lighter
cable for both charging the installed re-chargeable battery
and operating.
oVFO/MEMORY•MEMORY WRITE SWITCH
[V/M•S.MW• ~ ~ ]
➥ Toggles between VFO and memory mode. (p. 7)
➥ Push for 1 sec. to enter memory edit condition. (p. 16)
➥ After pushing [FUNC], select scan skip condition. (p. 30)
!0 POWER SWITCH [PWR]
Push for 1 sec. to turn the receiver power ON and OFF.
!1 MODE•SCAN SWITCH [MODE•SCAN]
➥ Push to select the receive mode. (p. 12)
➥ Push for 1 sec. to start a scan. (p. 26)
➥ While pushing [FUNC], start a tone scan. (p. 38)
], selects the operating band
PANEL DESCRIPTION
!2 TUNING STEP•SET SWITCH [TS•SET]
➥ Push to enter tuning step selecting mode. (p. 9)
➥ Push for 1 sec. to enter set mode. (p. 39)
➥ While pushing [FUNC], trade [DIAL] and [Y]/[Z] func-
tion. (p. 49)
*The function of [DIAL] and [Y]/[Z] can be traded. See page 49 for
details.
1
1
2