Product Description - Teledyne T3CP100-2 Manual

T3CP100-2 Product Description
12mm Diameter
Measurement Jaw
Current Probe
Power On / Off Switch
Turns the probe power on or off. The power indicator will be alight if the power is on and off if the
power is off.
Power Indicator
The power indicator will be alight when the power is turned on, and off when the power is off.
Low Battery Indicator
When the voltage of the battery is 6.5V or lower the low battery indicator will be lit red indicating that
the battery should be changed or external power applied to the probe.
External DC Power Socket
This is the point where the external power supply (supplied) is connected to the T3CP100-2 current
probe.
High / Low Range Indicators
During use of the probe one of the high / low indicators will always be lit indicating the current
measurement range selected. The range can be changed by using the High / Low Range Selector.
High / Low Range Selector
This button allows the high or low range of the probe to be selected.
Power Indicator
High / Low Range
Indicators
High / Low Range
Selector
High / Low Range
Selection Table
1m Interconnect
Cable
Page 4
BNC Output
Connector
Low Battery Indicator
Power On / Off Switch
External DC Power
Auto Zero Indicator
Auto Zero Button
Control Unit
Socket