Selecting Scope Parameter Sections - Midas PRO1 Owner's Manual

Selecting scope parameter sections

The Recall Scope screen has a section for each of the following.
Description
Routing
All
Mic Amp
(config)
EQ
Dynamics
Bus Sends
Mute
Fader
Assignable
Effects/Graphic
EQ
>> To open the Recall Scope screen
At either GUI screen, choose home
Selecting scope parameter sections
The scope function buttons provide a number of ways of selecting/deselecting scope
parameters, such as singly, by channel type, all on the control centre etc.
When a parameter is selected, its background changes from blue
Selection is cumulative, so you can combine any of the selection/deselection functions
until all the desired parameter sections have been selected. When you have finished
the selection process, just go to the next screen you require; you don't have to save
your selection, as it remains stored in the current condition until you alter it again.
The "Assignable Effects" panel lets you choose which effects are 'out of scene' on scene
recall.
For details of the parameters affected by scope, see Appendix F "Parameters Affected
By Scope" on page 349.
PRO1 Live Audio System
Operator Manual
Yes Yes No
Yes Yes Yes
Yes Yes No
Yes Yes Yes
Yes No Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
N/A N/A N/A
No No No
Yes Yes Yes
No No No
Yes Yes No
Yes Yes No
No Yes No
Yes Yes Yes
Yes Yes Yes
N/A N/A N/A
Automation Recall Scope.
 
195
Symbol
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Yes
to green .