Pro1 Control Surface - Midas PRO1 Owner's Manual

18

PRO1 control surface

During show time the functions that require fast access are controlled by control knobs
(rotary encoders), pushbutton switches, faders etc. More complex functions that do not
require this fast access are controlled via the GUI screen using the trackball and left and
right navigational keys.
Main areas of control surface
Item
A
B
C
D
Chapter 3: About The PRO1 Control Centre
GUI
G U I
E
G
Description
Channel processing areas Contains processing areas, such as the D-
zone (dynamic), E-zone (EQ) and mix buses, to the left that provide a more
comprehensive control of a channel or mix bus by allowing detailed audio
parameter adjustment. The mix bus selection controls are to the right of
the channel processing areas, under which are the mute groups and global
tap sections.
Masters This section has a single fader with left and right meters, solo
and mute buttons, and left and right master channel selection buttons. It
controls the left and right master outputs.
monitors This section contains a single fader and is used for the stereo
left and right monitor a or b channels.
Comms Talk, solo, headphones, etc.
A
F
I
H
B C D
PRO1 Live Audio System
Operator Manual