Output Channels; Output Channel Routing - Midas PRO1 Owner's Manual

Chapter 31: Output Channels
This chapter shows you the areas on the control surface that are used to manage the
outputs and also describes their function. There are three type of output: auxes,
matrices and masters.
The structure of this chapter is loosely based on the signal path of the output channels
and also the processing areas, which are opened via the output channel overview
displays in the GUI channel strip.

Output channel routing

The following table shows the approximate signal path of each output type.
Channel controls
Configuration
Direct input
*#Dynamics (dual
compressor)
Insert
*EQ
Mixes
Master controls,
solo select and
fader
* Order can be swapped (see "Processing order" on page 291).
# Includes side chain section.
PRO1 Live Audio System
Operator Manual
Aux Matrix
See page 289 See page 289
See page 291 See page 291
See page 283 See page 283
See page 291 See page 291
See page 284 See page 284
Matrix sends only N/A
(see page 292)
See page 292 See page 292
275
Master
See page 289
See page 291
See page 283
See page 291
See page 284
N/A
See page 292