Guest Wifi Settings - ZyXEL Communications Nebula LTE3301-PLUS User Manual

Click the Arrow icon (
the Eye icon (
Scanning the QR code is an alternative way to connect your WiFi client to the WiFi network.
Select Keep 2.4G and 5G the same to use the same SSID for 2.4 GHz and 5 GHz bands.
Figure 42 WiFi Settings: Configuration
Each field is described in the following table.
Table 17 WiFi Settings: Configuration
LABEL
2.4 GHz / 5 GHz WiFi
WiFi Name
WiFi Password
Random Password
Hide WiFi network
name
Save

6.2 Guest WiFi Settings

Use this screen to enable or disable the guest 2.4 GHz and/or 5 GHz wireless networks. When the switch
goes to the right (
Chapter 6 Connection Status
) to configure the SSIDs and/or passwords for your main wireless networks. Click
) to display the characters as you enter the WiFi Password.
DESCRIPTION
Click this switch to enable or disable the 2.4G / 5G WiFi network. When the switch turns blue
, the function is enabled.
The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN.
If you selected Random Password, this field displays a pre-shared key generated by the Zyxel
Device.
If you did not select Random Password, you can manually type a pre-shared key from 8 to 64
case-sensitive keyboard characters.
Click the Eye icon to show or hide the password for your wireless network. When the Eye icon
is slashed , you will see the password in plain text. Otherwise, it is hidden.
Select this to have the Zyxel Device automatically generate a password. The WiFi Password
field will not be configurable when you select this option.
Select this to hide the SSID in the outgoing beacon frame so a station cannot obtain the SSID
through scanning using a site survey tool.
Note: Disable WPS in the Network Setting > Wireless > WPS screen to hide the SSID.
Click Save to save your changes.
), the function is enabled. Otherwise, it is not. You can check their SSIDs (WiFi
Nebula Mobile Router User's Guide
97