ZyXEL Communications Nebula LTE3301-PLUS User Manual page 28

Figure 11 Nebula NR5101
Figure 12 Nebula NR7101
Figure 13 Nebula LTE7461-M602
The following table describes the items on the Zyxel Device ports and buttons.
Table 7 Nebula LTE3301-PLUS Panel Ports and Buttons
LABELS
ANT1-ANT2
LAN/Ethernet
WiFi
WPS
RESET
POWER Button
POWER / DC IN
Reboot
SIM card
Chapter 2 Hardware Panels
DESCRIPTION
Install the external antennas to strengthen the cellular signal.
Connect a computer to the LAN using an RJ45 cable.
Press the WLAN (WiFi) button for more than 5 seconds to enable WiFi.
After WiFi is enabled, press the WLAN button for more than one second but less than 5
seconds to quickly set up a secure wireless connection between the Zyxel Device and
a WPS-compatible client.
Press the button for more than 5 seconds to return the Zyxel Device to the factory
defaults.
Press the POWER button after the power adapter is connected to start the Zyxel Device.
Connect the power adapter and press the POWER button to start the Zyxel Device.
Press the RESET button for more than 2 seconds but less than 5 seconds, it will cause the
system to reboot.
Insert a micro-SIM card into the slot with the chip facing down and the beveled corner
in the top left corner.
Nebula Mobile Router User's Guide
28