ZyXEL Communications Nebula LTE3301-PLUS User Manual page 183
Hide thumbs
Also See for Nebula LTE3301-PLUS:
- User manual (361 pages) ,
- Quick start manual (27 pages) ,
- User manual (235 pages)
Table of Contents
Advertisement
Figure 104 Network Setting > Routing > Policy Route: Add or Edit
The following table describes the labels in this screen.
Table 60 Policy Route: Add or Edit
LABEL
DESCRIPTION
Active
Click this to enable (turns blue) activation of the policy route. Otherwise, click to disable (turns
gray).
Route Name
Enter a descriptive name of up to eight printable English keyboard characters, not including
spaces.
Source IP
Enter the source IP address.
Address
Source Subnet
Enter the source subnet mask address.
Mask
Protocol
Select the transport layer protocol (TCP, UDP, or None).
Source Port
Enter the source port number.
Source MAC
Enter the source MAC address.
Source Interface
Type the name of the interface from which the matched traffic is sent.
(example: br0 or
LAN1 – LAN4)
WAN Interface
Select a WAN interface through which the traffic is sent. You must have the WAN interfaces
already configured in the Broadband screens.
Cancel
Click Cancel to exit this screen without saving.
OK
Click OK to save your changes.
Chapter 10 Routing
Nebula Mobile Router User's Guide
183
Advertisement
Table of Contents
Troubleshooting
