ZyXEL Communications Nebula LTE3301-PLUS User Manual page 158

Table 50 Network Setting > Home Networking > LAN Setup (continued)
LABEL DESCRIPTION
Link Local Address A link-local address uniquely identifies a device on the local network (the LAN). It is similar to
Type a "private IP address" in IPv6. You can have the same link-local address on multiple
interfaces on a device. A link-local unicast address has a predefined prefix of fe80::/10. The
link-local unicast address format is as follows. Select EU
generate an interface ID for the LAN interface's link-local address using the EU
Otherwise, enter an interface ID for the LAN interface's link-local address if you select
Manual.
EUI64
Select this to have the Zyxel Device generate an interface ID for the LAN interface's link-
local address using the EUI-64 format.
Manual Select this to manually enter an interface ID for the LAN interface's link-local address.
LAN Global Select EU
Identifier Type global address. Select Manual to manually enter an interface ID for the LAN interface's
global IPv6 address.
EUI64
Select this to have the Zyxel Device generate an interface ID using the EUI-64 format for its
global address.
Manual Select this to manually enter an interface ID for the LAN interface's global IPv6 address.
LAN IPv6 Prefix Select Delegate prefix from WAN to automatically obtain an IPv6 network prefix from the
Setup service provider or an uplink router. Select Static to configure a fixed IPv6 address for the
Zyxel Device's LAN IPv6 address.
Delegate prefix Select this option to automatically obtain an IPv6 network prefix from the service provider or
from WAN an uplink router.
Static Select this option to configure a fixed IPv6 address for the Zyxel Device's LAN IPv6 address.
LAN IPv6 Address Select how you want to obtain an IPv6 address:
Assign Setup
Stateless: The Zyxel Device uses IPv6 stateless auto-configuration. RADVD (Router
Advertisement Daemon) is enabled to have the Zyxel Device send IPv6 prefix information in
router advertisements periodically and in response to router solicitations. DHCPv6 server is
disabled.
Stateful: The Zyxel Device uses IPv6 stateful auto-configuration. The DHCPv6 server is
enabled to have the Zyxel Device act as a DHCPv6 server and pass IPv6 addresses to
DHCPv6 clients.
LAN IPv6 DNS Assign Select how the Zyxel Device provide DNS server and domain name information to the
Setup clients:
From Router Advertisement: The Zyxel Device provides DNS information through router
advertisements.
From DHCPv6 Server: The Zyxel Device provides DNS information through DHCPv6.
From RA & DHCPv6 Server: The Zyxel Device provides DNS information through both router
advertisements and DHCPv6.
DHCPv6 Configuration
DHCPv6 Active
This shows the status of the DHCPv6. DHCP Server displays if you configured the Zyxel Device
to act as a DHCPv6 server which assigns IPv6 addresses and/or DNS information to clients.
IPv6 Router Advertisement State
RADVD Active This shows whether RADVD is enabled or not.
IPv6 DNS Values
Chapter 9 Home Networking
I 64 to have the Zyxel Device generate an interface ID using the EU
Nebula Mobile Router User's Guide
158
I 64 to allow the Zyxel Device to
I -64 format.
I -64 format for its