Making A Voip Call - ZyXEL Communications Nebula LTE3301-PLUS User Manual

Click the Modify icon of PHONE1 to configure PHONE1 on your Zyxel Device. The following screen
2
appears.
Under SIP1 SIP Account to Make Outgoing Call, select SIP1 to have the phone connected to the first
3
phone port use the registered SIP1 account to make outgoing calls.
Under SIP Account(s) to Receive Incoming Call, select SIP1 to have the phone connected to the first
4
phone port receive phone calls for the SIP1 account. Click OK to save your changes.

5.7.5 Making a VoIP Call

Follow these steps to make a phone calling using Voice over IP (VoIP).
Make sure you connect a telephone to phone port 1 on the Zyxel Device.
1
Make sure the Zyxel Device is turned on and connected to the Internet.
2
Chapter 5 Tutorials
Nebula Mobile Router User's Guide
81