ZyXEL Communications Nebula LTE3301-PLUS User Manual page 207

Figure 125 Interface Group Configuration
The following table describes the fields in this screen.
Table 76 Interface Group Configuration
LABEL DESCRIPTION
Group Name Enter a name to identify this group. You can enter up to 30 characters. You can use letters,
numbers, hyphens (–) and underscores (_). Spaces are not allowed.
WAN Interfaces Select the WAN interface this group uses. The group can have up to one PTM interface, up to
used in the one ATM interface, up to one ETH interface, and up to one WWAN interface.
grouping
Select None to not add a WAN interface to this group.
Selected LAN Select one or more interfaces (Ethernet LAN, wireless LAN) in the Available LAN Interfaces list
Interfaces and use the left arrow to move them to the Selected LAN Interfaces list to add the interfaces to
this group.
Available LAN
Interfaces To remove a LAN or wireless LAN interface from the Selected LAN Interfaces, use the right-facing
arrow.
Chapter 14 Interface Grouping
Nebula Mobile Router User's Guide
207