Mgmt Services For Ip Passthrough - ZyXEL Communications Nebula LTE3301-PLUS User Manual

Figure 167 Maintenance > Remote Management > MGMT Services
The following table describes the fields in this screen.
Table 111 Maintenance > Remote Management > MGMT Services> MGMT Services
LABEL
WAN Interface
used for services
Cellular WAN
ETHWAN
Service
LAN/WLAN
WAN
Trust Domain
Port
Apply
Cancel

29.3 MGMT Services for IP Passthrough

Configure which interfaces you can use to access the Zyxel Device in IP Passthrough mode for a given
service. You can also specify the service port numbers computers must use to connect to the Zyxel
Chapter 29 Remote Management
DESCRIPTION
Select Any_WAN to have the Zyxel Device automatically activate the remote management
service when any WAN connection is up.
Select Multi_WAN and then select one or more WAN connections to have the Zyxel Device
activate the remote management service when the selected WAN connections are up.
Enable the cellular WAN connection configured in Network Setting > Broadband > Cellular WAN
to access the service on the Zyxel Device.
If there are multiple cellular WANs configured on the Zyxel Device, you can select which to use
for device management.
Enable the Ethernet WAN connection configured in Network Setting > Broadband > Ethernet
WAN to access the service on the Zyxel Device.
This is the service you may use to access the Zyxel Device.
Select the Enable check box for the corresponding services that you want to allow access to the
Zyxel Device from the LAN or WLAN.
Select the Enable check box for the corresponding services that you want to allow access to the
Zyxel Device from all WAN connections.
Select the Enable check box for the corresponding services that you want to allow access to the
Zyxel Device from the trusted host IP address.
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Click Apply to save your changes back to the Zyxel Device.
Click Cancel to restore your previously saved settings.
Nebula Mobile Router User's Guide
270