ZyXEL Communications Nebula LTE3301-PLUS User Manual page 89

Figure 37 System Info: Detailed Information
Each field is described in the following table.
Table 14 System Info: Detailed Information
LABEL DESCRIPTION
Host Name This field displays the Zyxel Device system name. It is used for identification.
Model Name This shows the model number of your Zyxel Device.
Serial Number This field displays the serial number of the Zyxel Device.
Firmware Version This is the current version of the firmware inside the Zyxel Device.
System Uptime This field displays how long the Zyxel Device has been running since it last started up. The
Zyxel Device starts up when you plug it in, when you restart it (Maintenance > Reboot), or
when you reset it.
Interface Status
Virtual ports are shown here. You can see the ports in use and their transmission rate.
WAN Information (These fields display when you have an Ethernet WAN connection.)
Link Type This field displays the type of WAN connection that the Zyxel Device is currently using, such
as Cellular WAN or Ethernet.
APN This field displays the Access Point Name (APN).
Mode This field displays the current mode of your Zyxel Device.
IP Address This field displays the current IP address of the Zyxel Device in the WAN.
IP Subnet Mask This field displays the current subnet mask in the WAN.
IPv6 Address This field displays the current IPv6 address of the Zyxel Device in the WAN.
Primary DNS This field displays the first DNS server address assigned by the ISP.
server
Secondary DNS This field displays the second DNS server address assigned by the ISP.
server
Chapter 6 Connection Status
Nebula Mobile Router User's Guide
89