Co-Axial With Ra24Ca; Overview - Valor RetroFire RF24JDN Installation Manual

Co-Axial with RA24CA

This appliance may ONLY be installed in an existing unaltered, functioning solid-fuel burning fireplace with a
working flue and constructed of non-combustible material.
This appliance may be installed in outdoor, weather protected environments as defined in the GV60CKO
Outdoor Conversion Kit instruction manual.
DO NOT install into combustible construction. This appliance is NOT APPROVED for installation with a zero
clearance kit.
WARNING
Some materials or items, although
safe, may discolor, shrink, warp,
crack, peel, and so on because of
the heat produced by the fireplace.
Avoid placing candles, paintings,
photos, and other items sensitive
to heat around the fireplace.
WARNING
HOT HEARTH / FLOOR! The hearth
or floor in front of the fireplace
may become very hot when the
fireplace heats. Do not use the
hearth as a seat or shelf. Solid
wood flooring in front of the
fireplace (if allowed) may shrink
during the heating season due to
heat.
(required, included)
co-axial insert fireplace
14
Barrier screen
RF24CA

Overview

Approved Chimney
Terminal Cap
Terminal
Adapter and
Flashing from
590FVK2
5" x 3" co-
axial using
590FVK2 Flex
Vent Kit
Existing
unaltered,
functioning
solid-fuel
burning
fireplace &
chimney