Table of Contents
Advertisement
Appendix B – Remote Control Operation
Setting ºC/24-hr or ºF/12-hr clock
In MAN mode, press and hold
buttons until temperature / clock display
changes from
°F / 12-hour
°C / 24-hour
Setting Time
The time display will ash after either:
- installing the battery, or
- pressing
+
To set the time, press buttons:
= hour
= minutes
Press
or wait to go back to MAN.
Modes of Operation
Brie y pressing SET cycles through
modes of operation.
>
>
T E M P
TEMP
M A N
M A N
NOTE: Press
or
to reach
mode.
M A N
Set the di erent parameters when
they are ashing.
44
+
>
>
TIMER
Manual Mode
M A N
Manual ame height adjustment.
Daytime Temperature Mode
TEMP
When pilot is lit, room temperature
is measured and compared to set
temperature. Flame height automatically
adjusts to reach Daytime Set
Temperature.
Night time Setback
T E M P
Temperature Mode
When pilot is lit, room temperature
is measured and compared to set
temperature. Flame height automatically
adjusts to reach Night Time Setback
Temperature.
Timer Mode
TIMER
When pilot is lit, two periods of time
(P1 and P2) can be programmed to use
Daytime and Night time temperatures
at speci c times.
Note: Display shows set temperature
every 30 seconds.
Advertisement
Table of Contents
