Table of Contents
Advertisement
Installation
Fit Standoff s
The standoff s are supplied fl at on the fi rebox top, and
are fi xed at one end.
1. Swivel the fl at standoff s.
2. Bend the standoff s as shown.
3. Fix the loose end to the top of the fi rebox.
32
Standoff
Fold fl at standoff s
Standoff s installed
Appliance Preparation
Install Vent Outlet
This unit is supplied with a vent outlet which must be
fi eld-installed into a rear or top vent confi guration.
1. Remove the vent elbow from the box within the
fi replace.
2. Install the vent as a rear or top outlet as needed (6
screws).
Installation as top outlet
Installation as rear outlet
Advertisement
Table of Contents
