Valor RetroFire RF24JDN Installation Manual page 31

Direct vent gas
Table of Contents

Advertisement

Installation
3. Identify the right side cross log, the longest, and
place it across the rear log. The narrow end of the
log rests in a notch of the rear log. The wide end of
the log lays fl at on the platform, fl ush with the edge
as indicated.
4. Identify the left side cross log which has one pin at
one end. Insert the pin in the hole at the front left
of the platform and rests the top part of the log into
the notch of the rear log as indicated.
5. Place the front log inserting its two pins into the
two holes at the front of the platform. The ends
of the log should be oriented towards the front as
the log should not hang over the inside edge of the
platform.
Pebbles
Six pebbles are supplied as decorative elements. If
used, they should be placed on the platform only. We
suggest to place the larger ones to cover the inside
edge of the platform and place others randomly. Not all
of them have to be used.
Install Fuel Bed
31

Advertisement

Table of Contents
loading

Table of Contents