Valor RetroFire RF24JDN Installation Manual page 26

Installation
Reinstall Log Support
RF24JD-CL
shown;
same for CA
Reinstall Firebox Top Baffl e (if removed)
Edge fits into
cleat at back
Install Top Convection Baffl e
Place the firebox as far back as possible within the
existing fireplace to allow ample space at front for the
fret, if used, and to allow convection air to flow under
the smoke curtain of the existing fireplace.
Slide the convection baffle into the clips located
underneath top of appliance.
Underside view
Clip convection baffle
to firebox
26
Reassemble Appliance
Install Convection Baffl e Extension
Install the convection baffle extension, sliding it on top
of the firebox into the guides on each side.
Slide the extension in or out to allow convection air to
flow under the smoke curtain of the existing fireplace.
At the maximum, the extension must cover the smaller
convection baffle. At the minimum, the extension will
be butted to the vent plate.