Electrostatic Discharge - Quectel SC200R Series Hardware Design

LTE-FDD B18 (10 MHz)
LTE-FDD B19 (10 MHz)
LTE-FDD B21 (10 MHz)
LTE-FDD B26 (10 MHz)
LTE-FDD B28 (10 MHz)
LTE-TDD B41 (10 MHz)

7.7. Electrostatic Discharge

The module is not protected against electrostatic discharge (ESD) in general. Consequently, it should be
subject to ESD handling precautions that are typically applied to ESD sensitive components. Proper ESD
handling and packaging procedures must be applied throughout the processing, handling and operation
of any application that incorporates the module.
The following table shows the electrostatic discharge characteristics of SC200R series module.
Table 59: ESD Characteristics (Temperature: 25 º C, Humidity: 45 %)
Tested Points
VBAT, GND
All Antenna Interfaces
Other Interfaces
SC200R&SC262R_Series_Hardware_Design
TBD TBD
TBD TBD
TBD TBD
TBD TBD
TBD TBD
TBD TBD
Contact Discharge
+/-5
+/-5
+/-0.5
TBD
TBD
TBD
TBD
TBD
TBD
Air Discharge
+/-10
+/-10
+/-1
Smart Module Series
-96.3 dBm
-96.3 dBm
-96.3 dBm
-93.8 dBm
-94.8 dBm
-94.3 dBm
Unit
kV
kV
kV
110 / 124