Operating And Storage Temperatures; Electrostatic Discharge - Quectel EP06 Series Hardware Design

NOTES
1)
1. SIMO is a smart antenna technology that uses a single antenna at the transmitter side and two
antennas at the receiver side to improve Rx performance.
2)
2. As per 3GPP specification.

6.5. Operating and Storage Temperatures

Table 26: Operating and Storage Temperatures
Parameter
Operating Temperature Range
Extended Temperature Range
Storage temperature Range
NOTES
1)
1. Within the operating temperature range, the module meets 3GPP specifications..
2)
2. Within the extended temperature range, the module remains the ability to establish and maintain a
voice, SMS, data transmission, emergency call, etc. without any unrecoverable malfunction. Radio
spectrum and radio network will not be influenced, while one or more specifications, such as P
may undergo a reduction in value, exceeding the specified tolerances of 3GPP. When the
temperature returns to the normal operating temperature level, the module meets 3GPP
specifications again.

6.6. Electrostatic Discharge

The module is not protected against electrostatics discharge (ESD) in general. Consequently, it is subject
to ESD handling precautions that typically apply to ESD sensitive components. Proper ESD handling and
packaging procedures must be applied throughout the processing, handling and operation of any
application that incorporates the module.
The following table shows the module electrostatic discharge characteristics.
EP06_Series_Hardware_Design
Min. Typ.
1)
-35 +25
2)
-40
-40
LTE-A Module Series
EP06 Series Hardware Design
Max. Unit
+75 º C
+85 º C
+90 º C
,
out
42 / 56