Electrostatic Discharge - Quectel EG91 Series Hardware Design

LTE-FDD B25 (10 MHz)
LTE-FDD B26 (10 MHz)
Table 49: EG91-NAXDL Conducted RF Receiving Sensitivity
Frequency Band
LTE-FDD B2 (10 MHz)
LTE-FDD B4 (10 MHz)
LTE-FDD B5 (10 MHz)
LTE-FDD B12 (10 MHz)
LTE-FDD B13 (10 MHz)
LTE-FDD B25 (10 MHz)
LTE-FDD B26 (10 MHz)
Table 50: EG91-VX Conducted RF Receiving Sensitivity
Frequency Band
LTE-FDD B4 (10 MHz)
LTE-FDD B13 (10 MHz)

6.7. Electrostatic Discharge

The module is not protected against electrostatic discharge (ESD) in general. Consequently, it is subject
to ESD handling precautions that typically apply to ESD sensitive components. Proper ESD handling and
packaging procedures must be applied throughout the processing, handling and operation of any
application that incorporates the module.
The following table shows the module's electrostatic discharge characteristics.
EG91_Series_Hardware_Design
-97.6 dBm -99 dBm
-99.1 dBm -99.9 dBm
Receiving Sensitivity (Typ.)
Primary Diversity
-98 dBm -99 dBm
-97.8 dBm -99.5 dBm
-99.4 dBm -100 dBm
-99.5 dBm -100 dBm
-99.2 dBm -100 dBm
-97.6 dBm -99 dBm
-99.1 dBm -99.9 dBm
Receiving Sensitivity (Typ.)
Primary Diversity
-98.2 dBm -99.2 dBm
-99.2 dBm -100 dBm
LTE Standard Module Series
-102.2 dBm -92.8 dBm
-102.7 dBm -93.8 dBm
3GPP (SIMO)
SIMO
-102.2 dBm -94.3 dBm
-102.2 dBm -96.3 dBm
-102.7 dBm -94.3 dBm
-102.5 dBm -93.3 dBm
-102.5 dBm -93.3 dBm
-102.2 dBm -92.8 dBm
-102.7 dBm -93.8 dBm
3GPP (SIMO)
SIMO
-102.2 dBm -96.3 dBm
-102.5 dBm -93.3 dBm
88 / 105