Special Mark - Quectel SC200R Series Hardware Design

d'inclinaison nécessaires pour rester conforme à l'exigence de la
p.i.r.e. applicable au masque d'élévation, énoncé e à la section 6.2.2.3, doivent être clairement indiqués.
i. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands
5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit
ii. for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the
band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate;
and
iii. where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s) necessary to
remain compliant with the e.i.r.p. elevation mask requirement set forth in section 6.2.2.3 shall be clearly
indicated.

1.1. Special Mark

Table 1: Special Mark
Mark Definition
Unless otherwise specified, when an asterisk (*) is used after a function, feature, interface,
pin name, AT command, or argument, it indicates that the function, feature, interface, pin, AT
*
command, or argument is under development and currently not supported; and the asterisk
(*) after a model indicates that the sample of such model is currently unavailable.
SC200R&SC262R_Series_Hardware_Design
Smart Module Series
16 / 124