Table of Contents
Advertisement
Gas supply and connection
Gas supply and connection
Gas pipe sizing must consider the gas input to this appliance as well as all other gas appliances in the
premises. The gas meter and regulator must be specified for the total gas rate. An approved sizing
chart such as the one in AS/NZS 5601.1 should be used.
The use of a rubber hose for any gas connection to a fixed appliance is NOT authorised by the
manufacturer.
IMPORTANT
The gas supply position will vary slightly based on if a Novo Cube has been ordered or Freestander
with a cabinet / plinth, refer installation pages for more information.
Gas connection
Firmly grasp the stainless steel flexi pipe and bend to line up with the gas control valve inlet, then
attach the pipe to the gas control valve and tighten.
Please note: The gas and power supply can be brought in through the base of the fire.
10 | Novo freestanding installation guide:13992-A 01-22
Advertisement
Table of Contents
