Fujitsu PRIMERGY RX300 S3 User Manual page 90

Chapter 3 OS Installation Using ServerStart
■ Checking Server Free Space
Decide a server to use as a remote resource server / PXE server and check it for enough free space for
storing resources.
●
Checking the Number of Servers
• When you have only one server, use it as the remote resource server, PXE server, and DHCP service
server. Check it for the required amount of free space.
• When you have multiple servers
• Check if a server performing the DHCP service exists. If not, decide a server for the DHCP
service.
• When there are multiple resources, they can be divided and stored in multiple remote resource
servers.
●
Checking Server Free Space
The following table shows the amount of free space required for each installation resource.
ServerStart Disc 1
ServerStart Disc 2
Windows Server 2003
Windows 2000 Server
Windows Server 2003 Service Pack 1
Windows 2000 Service Pack 4
Windows Server 2003 R2 , Standard Edition Disc 1
Windows Server 2003 R2 , Standard Edition Disc 2
Windows Server 2003 R2 , Enterprise Edition Disc1
Windows Server 2003 R2 , Enterprise Edition Disc 2
Windows Server 2003 R2 , Standard x64 Edition Disc 1
Windows Server 2003 R2 , Standard x64 Edition Disc 2
Windows Server 2003 R2 , Enterprise x64 Edition Disc 1
Windows Server 2003 R2 , Enterprise x64 Edition Disc 2
Calculate the total resource size. Check that the remote resource server / PXE server has enough free
space (free space greater than the space required for the resources). When the amount of free space is
insufficient, you must use more remote resource servers.
90
table: Free Space Required for Resources
Resource Required free space
approx. 650MB
approx. 450MB
644MB
472MB
389MB
433MB
609MB
125MB
610MB
125MB
629MB
172MB
631MB
172MB