Fujitsu PRIMERGY RX300 S3 User Manual page 183

6
Slide out the server.
Hold the handle and slide out the server until it clicks, and the server is locked on the rail on both
sides.
7
Slide back the top cover while pushing the button on both sides.
8
Slowly lift up the top cover and remove it from the server.
■ How to Attach the Top Cover
Attaching the top cover by reversing the procedure in "7.2.1 How to Remove the Top Cover" ( pg.182).
When sliding the server back in, press and release the lock on the right-side rail.
Lock
Handles
• Be careful not to pinch fingers or clothes when sliding out the server or pushing
it back. Failure to do so may cause injury.
Buttons Top cover
• Before attaching the top cover, make sure no unnecessary parts or tools are
left inside the server.
• When turning on the server, make sure the top cover is closed.
PRIMERGY RX300 S3 User's Guide
7
183