Checking The Fork Legs - Husqvarna FS 450 2018 Repair Manual

6 FORK, TRIPLE CLAMP
6.16
28

Checking the fork legs

-
Remove the seal ring retainer from the piston rod.
G,
-
Remove adjusting tube
Condition
The fork legs have been disassembled.
-
Check the inside fork tube and the axle clamp for damage.
If damage is found:
-
Change the inside fork tube.
-
Measure the outside diameter of the inside fork tube at sev­
eral places.
Outside diameter of the
inside fork tube
If the measured value is less than the specified value:
-
Change the inside fork tube.
-
Measure the run-out of the inside fork tube.
Run-out of the inside fork
tube
If the measured value is greater than the specified value:
Change the inside fork tube.
from the piston rod.
47.975 ... 48.005 mm
(1.88878 ... 1 .88996 in)
� 0.20 mm (� 0.0079 in)