Installing The Gear Position Sensor; Installing The Suction Pump - Husqvarna FS 450 2018 Repair Manual

17 .5.19

Installing the gear position sensor

17.5.20

Installing the suction pump

Position the gear position sensor.
O.
Mount and tighten screws
Guideline
Screw, gear M5
position sensor
Oil the internal rotor and external rotor before mounting.
O.
Insert 0-ring
fj
Position pin into the oil pump shaft from above.
Position pin (D.
8
Mount internal rotor and external rotor @t.
✓ The rounded sides of the external rotor face the engine
case.
Position oil pump cover (3. Mount and tighten screws
Guideline
Screw, suction M5
pump cover
ENGINE 17
5 Nm (3. 7 lbf ft)
..
Loctite ® 243
™
@.
6 Nm (4.4 lbf ft)
..
®
Loctite 243
™
237