Table of Contents
Advertisement
9 SHOCK ABSORBER, LINK FORK
74
Mount rebound washer
Mount compression shim stack
facing downward.
802057-10
-
Sand down piston
1200 grit sandpaper.
-
Clean the piston.
Mount the piston.
Guideline
ViewO
ViewG)
Mount rebound shim stack @ with the smaller washers fac
ing upward.
802058-10
Mount washer
C,
with cut-out facing down.
0
with the smaller washers
(D
on both sides on a surface plate using
of piston from above
of piston from below
fD
with the groove facing downward.
Advertisement
Table of Contents
