Table of Contents
Advertisement
17 ENGINE
17.4.45 Assembling the countershaft
Preparatory work
-
Lubricate all parts carefully before assembling.
-
Check the transmission.
Main work
-
Secure the countershaft in the bench vise with the toothed end facing downward.
I
Guideline
Use soft jaws.
-
Mount needle bearing
facing downward.
-
Mount stop disk
-
Mount second/fourth-gear shift collar
-
Mount lock ring (3 and stop disk @.
-
Mount needle bearing
-
Mount needle bearing 4D) and the third-gear idler gear
-
Mount stop disk
-
Mount the fifth-gear sliding gear
-
Mount needle bearing Gs), first-gear idler gear
-
Finally, check all the gear wheels for smooth operation.
224
Info
Use new lock rings with every repair.
(a
p. 221)
O
and second-gear idler gear
C,
and lock ring
@)
and the fourth-gear idler gear
48
and lock ring 41).
8
onto the countershaft with the protruding collar
C,.
0
with the shift groove facing up.
@)
with the collar facing up.
48
with the collar facing down.
e
with the shift groove facing down and stop disk G).
4D
with the recess facing downward, and stop disk
310090-10
Gs).
Advertisement
Table of Contents
