Table of Contents
Advertisement
� -
-rr
� _
I
SHOCK ABSORBER, LINK FORK 9
When the pressure gauge reaches the specified value, turn
0
control lever
Oil reservoir
Guideline
0 bar
✓ The vacuum gauge drops to the required value.
4 mbar
When the vacuum gauge reaches the required value, turn
0
control lever
Oil reservoir
Guideline
j 4 mbar
✓ The pressure gauge drops to the required value.
0 bar
When the pressure gauge reaches the specified value, turn
8
control lever
Damper
to Pressure.
Guideline
0 bar
✓ Oil is pumped into the damper.
✓ The pressure gauge increases to the required value.
3 bar
When the pressure gauge reaches the specified value, turn
8
control lever
Damper
to Vacuum.
Guideline
3 bar
✓ The pressure gauge drops to the required value.
0 bar
When the pressure gauge reaches the required value, acti
vate the
switch.
On/Off
Guideline
0 bar
✓ The vacuum pump is switched off.
Slide O-ring G) to the end of the special tool by the specified
f)
value (distance
minus specified value).
Guideline
5mm
Depth micrometer (T107S)
Slide the floating piston into the reservoir to the shortened
position using the special tool.
to Vacuum.
to Equalize Pressure.
(8
p. 317)
79
Advertisement
Table of Contents
