Nm (8.9 Lbf Ft) - Husqvarna FS 450 2018 Repair Manual

Main work
-
Remove all the screws on the main silencer.
-
Take off silencer cap
-
Take off outer tube (!}.
-
Remove glass fiber yarn filling
connecting cape.
-
Clean the parts that need to be reinstalled and check for
damage.
-
Mount the new glass fiber yarn filling with connecting cap
onto the inner tube.
-
Position the inner tube with the connecting cap and glass
fiber yarn filling in the outer tube.
-
Position the silencer cap in the outer tube.
-
Mount and tighten all of the screws.
Guideline
Screws on main
silencer
H01757-10
Finishing work
-
Install the main silencer.
-
Install the right side cover.
EXHAUST SYSTEM
O.
8
from the inner tube with
M5 7 Nm (5.2 lbf ft}
(0 p. 94)
(0 p. 100)
10
...
95