11.28
Installing the silencer
11.29
Changing the glass fiber yarn filling of the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, the performance characteristic changes.
SERVICE WORK ON THE CHASSIS 11
–
Remove screws
silencer.
V01323-10
–
Position the silencer.
–
Mount screws
V01324-10
–
Attach spring
Spring hook (50305017000C1)
–
Tighten screws
Guideline
Remaining screws,
chassis
V01378-11
Preparatory work
–
Remove the silencer. (
2
with the washers and take off the
1
with the washers, but do not tighten yet.
2
.
1
.
M6
10 Nm (7.4 lbf ft)
p. 66)
67