The Laser Voltage Is Out Of Specification; The Source Voltage Is Out Of Specification; The Power Supply Voltages Are Out Of Tolerance - Thermo Scientific Nicolet iS10 Using Manual

The laser voltage is out of specification

1.—Remove any accessories or samples from the sample compartment, and then align your
instrument.
2.—Replace the laser.
3.—Contact us for assistance.

The source voltage is out of specification

1.—Check to see if the source is properly seated in its holder.
2.—Replace the source.
3.—Contact us for assistance.

The power supply voltages are out of tolerance

1.—Replace the power supply.
2.—Contact us for assistance.
Thermo Fisher Scientific Using Your Nicolet iS10 Spectrometer 39