Table of Contents
Advertisement
Notice: Do not to twist the source as you remove it, and do not touch the electrical contacts
or the source element.
3.—Remove the old source.
Notice: Do not twist the new source as you insert it. Keep the notch in the top of the source
aligned with the pin in the source holder as you insert the new source.
4.—Insert the new source.
Once the source is inserted, push it gently until the pin in the source holder fits into the
notch in the base of the source.
22
Using Your Nicolet iS10 Spectrometer
Thermo Fisher Scientific
Advertisement
Table of Contents
