Advertisement
MAINTENANCE
Transmission (Before 01/2020)
To adjust the Transmission Chain, loosen the 5/8" Idler
Sprocket Axle Bolt and adjust the Clevis Drawbolt
Locknut to obtain about 1/8"-1/4" sag. Re-tighten the
Idler Sprocket Axle Bolt. Be careful not to over-tighten
this chain. See Figure 5-5.
Adjust the #550 Drive Chain between the Front Roller
Sprocket and Transmission by adjusting the Nylatron
Tension Idler to allow approximately 2" of Total Chain
Deflection.
Axle Bolt
Drawbolt
T
SL2 OpOldT
1"
2" Total
Figure 5-5: Transmission (Before 01/2020)
9K998-0522
5-7
Advertisement
