Advertisement
Transporting Safety
IMPORTANT
It is the responsibility of the owner/operator to
comply with all state and local laws.
• When transporting the implement on a road or
highway, use adequate warning symbols, reflectors,
lights and slow moving vehicle sign as required. Slow
moving tractors and towed implements can create a
hazard when driven on public roads. They are difficult
to see, especially at night.
• Do not tow an implement that, when fully loaded,
weighs more than 1.5 times the weight of the towing
vehicle.
• Carry reflectors or flags to mark the tractor and
implement in case of breakdown on the road.
• Do not transport at speeds over 20 MPH under good
conditions. Never travel at a speed which does not
allow adequate control of steering and stopping.
Reduce speed if towed load is not equipped with
brakes.
• Avoid sudden stops or turns because the weight of the
implement may cause the operator to lose control of
the tractor. Use a tractor 1.5 times heavier than the
machine.
• Use caution when towing behind articulated steering
tractors; fast or sharp turns may cause the machine to
shift sideways.
• Keep clear of overhead power lines and other
obstructions when transporting. Know the transport
height and width of your machine. See
"Specifications" on Pages 6-1 through 5-6.
Safety Instructions for Towing
Vehicles
The maximum travel speed is the lesser of
• The limit of the road conditions;
• The maximum specified ground speed;
— for towing operations as indicated in this manual
or SIS;
— of the towed vehicle as indicated in its operator's
manual, SIS, or information sign;
• The maximum ground speed of the towed equipment
combination shall be limited to the lowest specified
ground speed of any of the towed machines. This
speed is the ground speed limitation.
EXAMPLE: If the tractor is capable of 25 mph, the first
implement has a SIS for 19 mph, and the last
implement's operator's manual states its specified
ground speed is 15 mph, the towed equipment
combination ground speed limitation is 15 mph.
9K998-0522
Attaching, Detaching and Storage
• Do not stand between the tractor and machine when
attaching or detaching machine unless both are not
moving.
• Before applying pressure to the hydraulic system, be
sure all connections are tight and that hydraulic hoses
are not damaged.
• Completely raise machine and install transport locks. If
desired to store lowered and on unpaved surface,
place hardwood blocks under roller to keep off ground.
• Block implement so it will not roll when unhitched from
the tractor.
• Relieve pressure in hydraulic lines before uncoupling
hydraulic hoses from tractor.
• Use a Safety Chain to help control drawn machinery
should it separate from the tractor drawbar.
NOTE
To relieve hydraulic pressure: Depending on tractor
hydraulic system, some can be relieved by actuating
control lever after engine is stopped. If tractor has electric
over hydraulic controls, it may be necessary to move the
control lever to the float position. Refer to tractor's
operator's manual.
Wear protective gloves and safety glasses or goggles
when working with hydraulic systems.
Maintenance Safety
• Block the machine so it will not roll when working on or
under it.
• Transport Locks installed.
• Do not make adjustments or lubricate machine while it
is in motion.
• Make sure all moving parts have stopped and all
system pressure is relieved.
• Understand the procedure before doing the work. Use
the proper tools and equipment.
Protective Equipment
• Wear protective clothing and equipment appropriate
for the job. Avoid loose fitting clothing.
• Because prolonged exposure to loud noise can cause
hearing impairment or hearing loss, wear suitable
hearing protection, such as earmuffs or earplugs.
Prepare for Emergencies
• Keep a First Aid Kit and Fire Extinguisher handy.
• Keep emergency numbers for doctor, ambulance,
hospital and fire department near the phone.
SAFETY INFORMATION
1-3
Advertisement
