Type Tests; Insulation; Creepage Distances And Clearances; High Voltage (Dielectric) Withstand - GE P24DM Technical Manual

P24xM
15

TYPE TESTS

15.1

INSULATION

Compliance
Insulation resistance
15.2

CREEPAGE DISTANCES AND CLEARANCES

Compliance
Pollution degree
Overvoltage category
Impulse test voltage (not RJ45)
Impulse test voltage (RJ45)
15.3

HIGH VOLTAGE (DIELECTRIC) WITHSTAND

IEC Compliance
Between independent opto-inputs or Vx and other circuits
Between all other independent circuits
Between Vx or opto-inputs, and protective earth terminal
Between all other independent circuits and protective earth terminal
Across open watchdog contacts
Across open contacts of changeover output relays
Between all RJ45 contacts and protective earth terminal
Between all screw-type EIA(RS)485 contacts and protective earth terminal
ANSI/IEEE Compliance
Across open contacts of normally open output relays
Across open contacts of normally open changeover output relays
Across open watchdog contacts
15.4

IMPULSE VOLTAGE WITHSTAND TEST

Compliance
Between all independent circuits
Between terminals of all independent circuits
Between all independent circuits and protective
earth conductor terminal
P24xM-TM-EN-2.1
IEC 60255-27: 2005
> 100 M ohm at 500 V DC (Using only electronic/brushless insulation tester)
IEC 60255-27: 2005
3
lll
5 kV
1 kV
IEC 60255-27: 2005
Front time: 1.2 µs, Time to half-value: 50 µs, Peak value: 5 kV, 0.5 J
Front time: 1.2 µs, Time to half-value: 50 µs, Peak value: 5 kV, 0.5 J
Front time: 1.2 µs, Time to half-value: 50 µs, Peak value: 5 kV, 0.5 J
Chapter 21 - Technical Specifications
IEC 60255-27: 2005
2.82kV dc for 1 minute
2 kV ac rms for 1 minute
2.82kV dc for 1 minute
2 kV ac rms for 1 minute
1 kV ac rms for 1 minute
1 kV ac rms for 1 minute
1 kV ac rms for 1 minute
1 kV ac rms for 1 minute
ANSI/IEEE C37.90-2005
1.5 kV ac rms for 1 minute
1 kV ac rms for 1 minute
1 kV ac rms for 1 minute
457