Table of Contents
Advertisement
CONTROL LEVERS AND SWITCHES
TILTING CAB MECHANISM OPERATION
q Do not attempt to enter or leave the cab while it is in the raised position, or while the cab is moving.
q Do not operate any other hydraulic equipment (travel, work equipment etc.) while operating the tilting
mechanism.
q Make sure that the cab door is shut correctly before starting a raise or lower movement of the cab.
q Always ensure that no-one is near the cab when the cab is raising or lowering.
q Before tilting the cab up or down, make sure that there are no loose objects stored in the cab which
may fall. This could cause obstruction to control or injury to the operator.
The raise/lower operation of the cab is activated by push button
(7) located in the panel in front of the driver (lower section, right
side)
To raise the cab press the upper end of switch (7).
To lower the cab press the lower end of switch (7).
To stop movement of the cab, release switch (7).
7-12
HIGH REACH DEMOLITION EQUIPMENT 27M
7
WARNING
c
Raise
Lower
7
Advertisement
Chapters
Table of Contents
