Table of Contents
Advertisement
TRANSPORTATION
Mirrors (C), (D)
(If equipped)
5. Install bracket (3) to the machine with bolt (4).
6. Install mirror (1) to bracket (3),then tighten locknut (2).
Unloading
1. Load and unload on firm level ground only. Maintain a safe
distance from the edge of a road.
2. Apply the trailer brakes securely, then put blocks (1) under
the tires to prevent the trailer from moving.
q
Set left and right ramps (2) parallel to each other and
equally spaced to the left and right of center (3) of the
trailer. Make angle of installation (4) a maximum of
15°. If the ramps bend a large amount under the
weight of the machine, put blocks under the ramps to
prevent them from bending.
3. Remove the chains and wire ropes fastening the machine.
4. Start the engine.
Warm the engine up fully.
5. Set the lock lever to FREE position (F).
3-176
OPERATION
3
Advertisement
Chapters
Table of Contents
