Table of Contents
Advertisement
TRANSPORTATION
5. Place blocks under both ends of the tracks to prevent the
machine from moving during transportation, and secure the
machine with chains or wire rope of suitable strength.
Be particularly careful to secure the machine in position so
it does not slip to the side.
Stowing Radio Antenna
q
Loosen bolt (2) of radio antenna (1) at the rear of the cab,
lower the antenna, then tighten bolt (2) again to secure radio
antenna (1) in position.
q
When unloading the machine from the trailer and operating
it, follow the opposite procedure from stowing to set radio
antenna (1) vertical, then secure it in position with bolt (2).
Rear View Mirrors
The mirrors are at the positions shown in the diagram on the
right.
If they are damaged, or are to be removed for shipment, or are
to be installed again, use the following procedure.
q
After installing the mirrors, be sure to adjust them, referring
to "Rear View Mirrors (3-122)".
Removal
Mirror (A)
1. Loosen locknut (2) of mirror (1), then remove mirror (1)
from support (3).
2. Loosen bolt (4) and remove support (3) and clamp (5) from
the handrail.
3-174
OPERATION
Advertisement
Chapters
Table of Contents
