Table of Contents
Advertisement
OPERATION
On the 2-Way Attachment Select Menu screen, it is possible to
carry out the following operations with switches F3 - F6.
F3: Moves to next item (1 line down).
F4: Moves to previous item (1 line up).
F5: Returns to user menu screen.
F6: Switches to setting screen for selected item.
Changing attachment setting 2 selection
1. Select attachment setting selection (a) on the attachment
setting menu screen, then press switch F6.
2. On the 2-Way Attachment Select Menu, select one of the
two set values for the oil flow, then press switch F6.
Q
The default values for the oil flow setting are both set
to 40 l/min, as shown in the illustration on the right.
To change the oil flow setting, follow the procedure
given in "See "Changing attachment 2 flow setting" on
page 56."
Q
The present oil flow set for ATT mode is marked with
ATT in front of the item name as shown in the illustra-
tion on the right.
DETAILED CONTROLS AND GAUGES
2
1C
2
A
3-55
Advertisement
Chapters
Table of Contents
