Table of Contents
Advertisement
DETAILED CONTROLS AND GAUGES
2. On the 2-Way Attachment Select Menu, select one of the
two set values for the oil flow, then press switch F6.
q
The default values for the oil flow setting are both set
to 550 liters/min, as shown in the illustration on the
right.
To change the oil flow setting, follow the procedure
given in "Changing attachment flow setting (3-53)".
q
The present oil flow set for ATT mode is marked with
ATT in front of the item name as shown in the illustra-
tion on the right.
q
If No 2-Way Attachment is selected, it becomes impos-
sible to select the attachment mode on the working
mode selection screen.
On the working mode selection screen, it is not possible to
select No 2-Way Attachment.
q
On the 2-Way Attachment Select Menu screen and 2-way
attachment select menu, it is possible to carry out the follow-
ing operations with switches F3 - F6.
F3: Moves to next item (1 line down).
F4: Moves to previous item (1 line up).
F5: Returns to previous screen.
F6: Switches to setting screen for selected item.
3-52
OPERATION
Advertisement
Chapters
Table of Contents
