Table of Contents
Advertisement
OPERATION
Changing attachment flow setting
1. Select 2-Way Attachment Oil Flow Setting (b) on the 2-Way
Attachment Select menu screen, then press switch F6.
2. On the 2-Way Attachment Select Oil Flow Setting screen,
select one of the two set values for the oil flow, then press
switch F6.
q
The default values for the oil flow setting are both set
to 550 liters/min, as shown in the illustration on the
right.
The present oil flow set for ATT mode is marked with
ATT in front of the item.
q
"No 2-Way Attachment" cannot be selected
q
On the 2-Way Attachment Select Menu screen and 2-Way
Attachment Select Menu screen, it is possible to carry out
the following operations with switches F3 - F6.
F3: Moves to next item (1 line down).
F4: Moves to previous item (1 line up).
F5: Returns to previous screen.
F6: Switches to setting screen for selected item.
DETAILED CONTROLS AND GAUGES
3-53
Advertisement
Chapters
Table of Contents
