Komatsu PC450-8 Operation & Maintenance Manual page 310

Hide thumbs Also See for PC450-8:

Table of Contents

MAINTENANCE PROCEDURE

Method of Setting Machine at Angle

Method Using Slope

Select a solid and smooth slope.

Always put blocks under the track to prevent the machine from moving, and dig the work equipment into

1. Stop the machine so that the work equipment is on the

downhill side.

2. Put blocks under the track and dig the work equipment into

Method Using Block

Select a firm flat place.

Put strong blocks under the undercarriage to stabilize the machine and be extremely careful when carry-

ing out the operation.

1. Raise the chassis with the boom and arm.

When doing this, operate the levers slowly.

2. Insert block (5) under the raised track to make the machine

3. Raise the boom slowly and lower the machine.

When doing this, check that the machine is always stable.

Chapters

Table of Contents