oventrop Regumaq X-45 Operating Instructions Manual page 76

6 Has the heat exchanger been
checked for external leaks?
7 Has a functional test been carried
out to verify performance (see oper-
ating instructions for functional con-
trol)?
8 Have all ball valves been checked for
free movement?
9 Have any strainers installed on site
been cleaned?
10 Are all shutoff fittings open?
11 Has the storage cylinder side been
vented and the air vents been
checked for opening and function?
12 Have the controller settings been
compared with the specifications in
the handover report (if necessary,
document changes in remarks)?
Give reasons for items that have not
been carried out or for items that have
been answered with No in the Remarks
field!
Controller settings
1 Has a software update been carried
out (document the new software
version)?
2 Have the basic settings (date, time,
...) been entered correctly?
3 Which potable water temperature
has been set?
4 Has the circulation been activated
(see controller operating instruc-
tions, paragraph Circulation)?
4.1 Which mode has been activated?
4.2 What settings have been made in
the mode?
5 Have additional functions been acti-
vated (see controller operating in-
structions, paragraph Additional
functions)?
5.1 Which additional functions have
been activated?
5.2 Which settings have been made in
the additional function(s)?
6 Is there an SD card for data record-
ing in the controller?
¨ ¨
¨ ¨
¨ ¨
¨ ¨
¨ ¨
¨ ¨
¨ ¨
Tick as appropriate or en-
ter value/number
Yes
¨ ¨
¨ ¨
¨ ¨
¨ ¨
1.
2.
3.
in 1.
in 2.
in 3.
¨ ¨
Remarks / Settings
No
Version
°C