Controller Presettings; Circulation (Presetting 1); Storage Cylinder Loading (Presetting 2); Circulation With Return Stratification (Presetting 3) - oventrop Regumaq X-45 Operating Instructions Manual

Regumaq X-45
Operation
8.4

Controller presettings

8.4.1

Circulation (presetting 1)

Mode Continuous operation
Relay R1
Connection PWM1
pump

8.4.2 Storage cylinder loading (presetting 2)

Mode Fixed value
Relay R3
Store sensor S6
8.4.3 Circulation with return stratification
(presetting 3)
Circulation
Mode Continuous operation
Relay R1
Connection PWM1
pump
Return stratification
Relay R2
Store sensor S4
Sensor return S5
temp.
8.4.4 Circulation with storage cylinder
loading (presetting 4)
Circulation
Mode Continuous operation
Relay R1
Connection PWM1
pump
Storage cylinder loading
Mode Fixed value
Relay R3
Store sensor S6
8.4.5 Circulation with return stratification and
storage cylinder loading (presetting 5)
Circulation
Mode Continuous operation
Relay R1
Connection PWM1
pump
40
Return stratification
Relay R2
Store sensor S4
Sensor return S5
temp.
Storage cylinder loading
Mode Fixed value
Relay R3
Store sensor S6
8.5

Setting of the timer

When programming the timer, first select the
days of the week and then the regular time frame
for activating or deactivating the respective func-
tion.
Access to the timer menu

Day selection

Selection of the days on which the
timer is to be active
Mon-Sun The timer should be active at the
same time every day
Reset Delete day selection
Back Switch to the higher menu level
8.5.1 Day selection
At this point you can select the weekdays on which the
timer is to be activated. You can select individual days or
groups.
Groups are used to shorten the entry. In the next step, you
can add more weekdays to the selection. You can then set
up to 6 common time frames for the selected weekdays.
Mon-Sun Group whole week
Mon-Fri Group Mon-Fri
Sa, So Group Sat, Sun
Mon
Tue
Wed
Thu Individual day
Fri
Sat
Sun
Back Switch to higher menu level
1
In the first step, select a group or an individual day.
2
Select the desired additional weekdays in the next
step.
3
Save the day selection with "Continue".
Z
You will be taken to the settings menu for the time
138114082-V04.04.2022