Dismantling And Disposal; Dismantling Of The Station; Disconnection Of The Station From The Power Supply; Disposal - oventrop Regumaq X-45 Operating Instructions Manual

Regumaq X-45

Dismantling and disposal

12. Dismantling and disposal
When the fresh water station reaches the end of its service
life or has an irreparable defect, it must be dismantled and
disposed of in an environmentally friendly manner or the
components must be recycled.

12.1 Dismantling of the station

12.1.1 Disconnection of the station from the
power supply
DANGER
Danger to life due to electric current!
There is a danger to life if live components are
touched.
!
Disconnect the product from the power supply
at all poles.
!
Check that no voltage is present.
!
Secure the product against being switching
back on again.
!
Only install the product in dry indoor areas.
f
Disconnect the station permanently from the power
supply.
Z
The station is de-energised and can be dismantled.
12.1.2 Dismantling of the station
CAUTION
Risk of injury from pressurised media!
Media escaping under pressure can cause injuries.
!
Only carry out work when the system is
depressurised.
!
Wear safety goggles.
CAUTION
Risk of burns on hot components!
Touching hot components can cause burns.
!
Allow the system to cool down.
!
Wear safety gloves.
f
Dismantle the station.
Z
The station can be disposed of separately according to
components.
138114082-V04.04.2022

12.2 Disposal

NOTICE
Risk of environmental pollution!
Incorrect disposal (for instance with domestic
waste) can lead to environmental damage.
!
Dispose of packaging material in an
environmentally friendly manner.
!
Dispose of the components properly.
Unless a take-back or disposal agreement has been made,
dispose of the station:
f
If possible, recycle the components.
f
Dispose of non-recyclable components according to
local regulations. Disposal with domestic waste is not
permitted.
57