oventrop Regumaq X-45 Operating Instructions Manual page 72

16 Which setpoint temperature for the
storage cylinder was set at the heat
generator?
17 Are all ball valves open?
Give reasons for items that have not
been carried out or for items that have
been answered with No in the Remarks
field!
Controller settings
1 Which software version is installed
on the controller (visible in the
touch control panel when the supply
voltage is established [version X.
XX])?
2 Have the basic settings (date, time,
...) been entered correctly?
3 Which potable water temperature
has been set?
4 Has the circulation been activated
(see controller operating instruc-
tions, paragraph Circulation)?
4.1 Which mode has been activated?
4.2 What settings have been made in
the mode?
5 Have additional functions been acti-
vated (see controller operating in-
structions, paragraph Additional
functions)?
5.1 Which additional functions have
been activated?
5.2 Which settings have been made in
the additional function(s)?
6 Is there an SD card for data record-
ing in the controller?
7 Is an error displayed?
8 Have any other modifications been
made to the settings of the control-
ler?
Give reasons for items that have not
been carried out or for items that have
been answered with No in the Remarks
field!
¨
Tick as appropriate or en-
ter value/number
Yes
Version
¨
¨
¨
1.
2.
3.
in 1.
in 2.
in 3.
¨
¨
¨
Tick as appropriate or en-
ter value/number
Yes
°C
¨
Remarks / Settings
No
¨
°C
¨
¨
¨
¨
¨
Remarks / Settings
No